Honey Wax Mould Release Agent

Product Description
Honey Wax® 250 is a unique, high gloss paste wax for
use by composite fabricators as a mold release agent. It
is compounded with the purest grade carnauba wax, plus
special binders and spreading agents.
Honey Wax® 250 reduces cycle times due to its exceptional
ease of application and buffi ng. It is an excellent mold
release agent providing reproducibility, high gloss, and a
non-staining, hard releasing fi lm which are important to
the fabricator. Honey Wax® 250 is our easiest to apply
and remove paste wax
Uses
For New Or Reconditioned Tooling Surfaces.
Direction for Use
Recommended Procedure
1. The mold surface should be thoroughly cleaned of all
contaminants such as oils, grease, wax, dirt, or previous
release agents by hand buffi ng with BuffAway™
2000 Polish followed by KantStik® Mold Cleaner. The
cleaned surface should be completely dry. Then apply 2
coats of KantStik® Sealer 1.0 to seal surface porosity.
2. Apply a thin, even fi lm of Honey Wax® 250 using circular
motions and making sure there is complete uniform
coverage. Use the applicator sponge or a clean, dry
rag.
3. The coating should be left to haze completely. This process
should take approximately 2-15 minutes depending
upon ambient temperatures and humidity. Hazing is
an important step, as all the solvents should evaporate
completely before buffi ng. The wax fi lm should be
totally dry.
4. Buff the surface to a luster using a fresh, clean absorbent
cloth or micro fi ber towel as soon as the wax fi lm
is totally dry.